Troubleshooting - Blaupunkt BV4000 Manual Del Usuario

Speci cation
Motor Rated Power
Motor
Speed
Blowing Air Flow (air velocity)
Suction Power (air velocity)
Collection Bag Volume
Protection Class
Weight

Troubleshooting

PROBLEM
Motor won't start
Material is not sucked in
properly (reduced
vacuuming power)
POSSIBLE CAUSE
1. No mains power (power failure)
2. Extension lead defect
3. Motor or switch defect
1. Machine is clogged or blocked
2. Bag too full
3. Extension cable too long or cross
section too small. Socket too far away
from the main connection and cross
section of extension lead too small.
3000W
AC - motor 230~240V 50Hz. 2500W
8000-14000rpm
150- 270Km/h
6- 14cbm
45L
II – Double Insulated
Approx 3.8kg
1. Check fuse (10A)
2. Replace lead or have lead checked by an
electrician. Never use a defective lead.
3. Contact the manufacturer or an authorised
company.
1. Clean machine
2. Empty bag
3. Extension cable at least 1.5m and a maximum of
25m long. Cross section of lead at least 2.5mm
for longer cables.
SOLUTION