EN
Machine Speci c Safety Instructions
In addition to the general safety guidance supplied, the following instructions are specific to this machine and must also be
adhered to.
• The electricity supply the chain saw is connected to should be provided with an earth leakage or residual current of not more
than 30Ma.
• When working with the chain saw the following safety equipment is vital to protect you.
-
Protective gloves
-
Suitable footwear
-
Leg protectors
-
Safety Glasses
-
Helmet
-
Ear Defenders
• Do not operate the tool near people, especially children or pets. Turn it off if they get too close. Maintain a safe distance of at
least 5m from other people when using the tool.
• Keep all cooling air inlets clear of debris.
• Never blow debris in the direction of bystanders.
• Do not start the tool when it is upside down or when it is not in the operating position.
• Do not allow the blower vacuum to pick up any burning or smoldering materials like ashes, cigarette butts etc.
• Do not attempt to pick up breakable objects like glass, plastics, china etc.
• Do not use in vacuum operation without the collection bag fitted
• Do not use the blower vacuum in either the vacuum or the blower position on gravel surfaces.
General Maintenance
• Keep all nuts, bolts and screws tight to be sure the appliance is in safe working condition.
• Check the appliance frequently for wear or deterioration.
• Ensure worn or damaged parts are replaced by a competent person.
• Use only Blaupunkt spare parts and accessories.
• Disconnect from the mains before cleaning
• When you have finished use, always check to make sure the product is clean and free of dirt and debris.
• Clean machine with a damp cloth only – do not use solvents.