Probuilder 66270 Manual De Instrucciones página 47

Assembly
Parts
The plasterboard lift is supplied in parts
which must be assembled before use:
• Base
• Frame including hoist and 120 cm
telescopic sections
• Cradle, without removable support arms
• Two support arms
Assembly instructions
1. Set the base up:
Place the base on the � oor so that it
rests on its wheels.
1
Flip the reverse brake down Flip the reverse brake down
Cradle
Telescopic
sections
Housing
Hoist
Base
Press the lock ring down. Hold the
lock ring down while you swing the
two front legs out so that the lock ring
engages with the hole at the bottom of
the tube. (See � gure 1).
To prevent the base rolling backwards
while assembling it, � ip the reverse
brake down as shown.
Press the lock ring down.
Support arm
Frame
GB
47