Probuilder 66270 Manual De Instrucciones página 53

Lifting the covering board
IMPORTANT! Always � ip the reverse brake
down before lifting the covering board up
towards a sloped wall or other wall.
Turn the handwheel round in the direction
shown (hold the strut to provide resistance)
until the covering board is at the required
height.
The brake is spring-loaded and
automatically holds the cradle securely at
the required height when you stop turning
the handwheel.
Lowering the covering board
1. Take hold of the handwheel handle with
your right hand so that you can control
the rotation of the hoist.
2. Keep tight hold of it. Carefully release
the brake with your left hand and turn
the handwheel slowly back to lower the
cradle to the required height.
WARNING! To avoid accidents, be aware of
any obstructions above the lift when lifting
boards.
CAUTION! The cradle drops quickly once the
brake lever is released. So grip the handle
on the handwheel � rmly with your right
hand BEFORE releasing the brake!
Control the rotation of the hoist
backwards
Carefully release
the brake
53
GB