Malfunction; Environment-Friendly Waste Processing - PlasmaMade GUC 1214 Manual De Instalación Y Usuario

9. Malfunction

Incompetent repairs are dangerous, you run the risk of an electric shock! If the
device is faulty, remove the plug from the socket and contact customer service at
service@plasmamade.com.
Malfunction
Device does not
work.
Red lamp flashing.
Blue light flashing
during the operating
mode.
Blue light flashing.
When there is no solution after trying the tricks above, please try our helpdesk at
www.plasmamadeservice.com

10. Environment-friendly waste processing

The PlasmaMade Airfilter complies with the requirements of the
European Directive concerning Waste Electrical and Electronic
Equipment (WEEE). This Directive contains stipulations in force in the
EU concerning the return and processing of scrap equipment.
Also ensure environmentally friendly processing of the waste packaging material.
This installation and user manual has been prepared carefully. However, no rights may be derived from any
printing or spelling errors.
14
Possible cause
The plug is not inserted
in the socket.
Power cut.
Blown fuse.
Overloading of filter.
The cleaning time of
the filter is reached.
The maximum lifetime
of the filter is reached.
Solution
Put the plug into the wall socket.
Check whether other kitchen
equipment is working.
Check at your central electricity point
whether the device's fuse is intact.
Remove power from the filter
temporarily, thereafter the electronics
will reset itself.
Turn the hood off. You can re-enable
the hood after 1-2 minutes.
Purchase a new filter.