Schwaiger DSR 1004 CW Manual De Usuario página 28

060615_k7 200 ENG sat_shw
Menu Guide
Channel Search
21
DIGITAL SATELLITE RECEIVER
6/15/06 6:01 AM ˘
3. C/KU Switch
4. LNB Freq.
5. C-LNB Freq.
6. LNB Power
7. 22KHz
8. 0V/12V
9. Tone Burst
10. DiSEqC
G After selecting all that is necessary, press RED button to scan the satellite list.
Pop up widow will be displayed.
G Select ON or OFF according to your Network.
G Select All or FTA Search Type.
G
Press OK( ) button and searching will start.
` 21 mac-4 HP LaserJet 5100 Series
: You can select C/KU band by selection of switch type.
: Select the proper LNB frequency referring to your LNB
using OK( ) and UP/DOWN(
: When selecting the C/KU Switch is selected as "None",
the C-LNB Freq will be dimmed automatically.
Press OK( ) button, and then the C-LNB Freq.
list will be displayed. You can also input the freq.
you want. After inputting freq. using numeric buttons,
press OK( ) button.
: Select the LNB Power On or OFF.
: Depending on the user's antenna switch box or LNB.
You can supply either 22KHz by setting "ON" or not by
setting "OFF".
: Depending on the user's antenna switch box.
You can choose either 0V/12V.
: Depending on the user's antenna switch box.
("off", "SAT A" or "SAT B")
: You can select and use appropriate port for your
DiSEqC switch box.
Press OK( ) button to select DiSEqC List.
(None, DiSEqC A, DiSEqC B, DiSEqC C, DiSEqC D)
T
) buttons.