Schwaiger DSR 1004 CW Manual De Usuario página 33

060615_k7 200 ENG sat_shw
Menu Guide
Channel Search
6/15/06 6:01 AM ˘
- Scan
Press the RED button on the TP list.
Pop up window will be displayed on the screen.
♦ Frequency :
♦ Symbol Rate : Input a proper Symbol Rate using NUMERIC buttons.
♦ Polarity :
♦ FEC :
♦ You can select the value of Auto, 1/2, 2/3, 3/4, 5/6, and 7/8.
♦ Network :
♦ Video PID/Audio PID/PCR PID :
3. Degree :
4. LNB Freq. :
5. LNB Power :
6. 22KHz:
` 26 mac-4 HP LaserJet 5100 Series
Input a proper Frequency using NUMERIC buttons.
Use the LEFT/RIGHT( / ) buttons to select the
Polarisation of the transponder.(Horizontal, Vertical)
Use the LEFT/RIGHT( / ) buttons to select the FEC
of the transponder.
You can select Yes or No. When you select 'Yes' ,
you can find more transponders using the home network.
You can set PID to search for services.
Use the LEFT/RIGHT( / ) buttons or NUMERIC buttons
to input the value.
Press OK( ) button to start Scanning.
Press the NUMERIC buttons and enter te degree.
Select the proper LNB frequency referring to your
LNB using OK( ) and UP/DOWN(
Select the LNB Power On or OFF.
Depending on the user's antenna switch box or LNB.
You can supply either 22KHz by setting "ON" or not
by setting "OFF".
When selecting the U-LNB 1 and U-LNB 2,
the 22KHz will be dimmed.
T
) buttons.
26
DIGITAL SATELLITE RECEIVER