Shure PG ALTA Serie Guia Del Usuario página 4

Using the Quick-Release Lever
This microphone features a quick-release lever to easily
adjust position.
1. Pull the lever open
2. Move the microphone into the desired position
3. Press the lever back towards the microphone to tighten
1
Certifications
This product meets the Essential Requirements of all relevant
European directives and is eligible for CE marking.
The CE Declaration of Conformity can be obtained from:
www.shure.com/europe/compliance
Authorized European representative:
Shure Europe GmbH
Headquarters Europe, Middle East & Africa
Department: EMEA Approval
Jakob-Dieffenbacher-Str. 12
75031 Eppingen, Germany
Phone: 49-7262-92 49 0
Fax: 49-7262-92 49 11 4
Email: EMEAsupport@shure.de
4
2
3
Note: To adjust the
tension on the lever,
pull it open and use a
flat head screwdriver
to tighten or loosen
the bolt on the
opposite side.
Specifications
Type
Dynamic (moving coil)
Frequency Response
50 to 12,000 Hz
Polar Pattern
Cardioid
Output Impedance
Sensitivity
at 1 kHz, open circuit voltage
-55 dBV/Pa¹ (1.75 mV)
Polarity
Positive pressure on diaphragm produces positive voltage on pin 2
with respect to pin 3
Weight
454 g (16.01oz.)
Connector
Three-pin professional audio (XLR), male
Environmental Conditions
Operating Temperature
Relative Humidity
1 Pa=94 dB SPL
20
0,6 m (2 ft.) from sound source
15
10
5
0
-5
-10
-15
-20
-25
-30
20 100
Typical Frequency Response
Typical Polar Pattern
-20° to 165°F (-29° to 74°C)
0 to 95%
1k 10k
Hz
1000 Hz
20k