Cleaning, Care & Maintenance
Switch off and disconnect from the power supply before cleaning.
•
The doors can be removed for ease of cleaning.
•
Clean the interior of the appliance as often as possible.
•
Do not use abrasive cleaning agents. These can leave harmful residues.
•
Clean the door seals with warm soapy water.
•
Always wipe dry after cleaning.
Replacing the Interior Lamp
Call your POLAR dealer or a qualified electrician, the Lamp Assembly is available to purchase as a spare
part.
Cleaning the condenser
•
Switch off and disconnect from the power supply before cleaning.
•
The condenser is part of the refrigeration system. The condenser requires
monthly cleaning.
1. The condenser is located on the right-hand side of the refrigeration cabinet at the rear.
2. Remove the screws fixing the ventilation panel.
3. Remove the panel to access the filter. Clean with a vacuum cleaner.
4. Re-locate the filter.
5. Re-attach the panel and fix it with the screws removed beforehand.
Troubleshooting
If the machine malfunctions due to causes other than those listed or the proposed corrective actions do
not solve the problem please call a Polar agent or qualified technician.
Fault
The appliance is not
working
The appliance is not
cooling
The Light does not
work
DB950_DB951_DB952_DB959_ML_A5_v1_20181213.indb 5
Probable Cause
The unit is not switched on
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Coolant Leak
Fan Motor Failed
Airflow to the condenser
obstructed
Condenser is clogged
Bulb has blown
Bulb Starter has blown
Solution
Check the unit is plugged in correctly and
switched on
Call POLAR agent or qualified Technician
Replace the fuse
Check power supply
Call POLAR agent or qualified Technician
Call POLAR agent or qualified technician
Call POLAR agent or qualified technician
Increase the gap between appliance and
obstacles/heat source
Cleaning the condenser
Replace Bulb with identical type
Replace Starter with identical type
UK
5
2018/12/13 11:37