Philips InteGrade LED Guía De Instalación Rápida página 12

Power driver and wiring
• To allow for variance in the installation, it is not recommended to load the power driver
beyond 90% of it's rated maximum power
- Xitanium LED driver 20 W (logistic code 929000654006) max 18 W
- Xitanium LED driver 80 W (logistic code 929000653906) max 72 W
- Xitanium LED driver 75 W (logistic code 929000869713) max 70 W
• Use Philips InteGrade LED power cable of 1 m (39 inch) or 2.5 m (98 inch)
• If InteGrade power cables are extended, only use 0.75 mm
length of max 10 m (32 feet) between driver and Philips LED power cable
• Only parallel connections are advised. If you wish to make any other configuration, please
contact Philips.
Wiring diagram with Philips InteGrade LED fixtures
Philips LED
Power Driver
24V DC
driver cable
approx 0.3 m
Philips LED
Power Driver
24V DC
driver cable
approx 0.3 m
12
A B
0.75 mm Philips LED
2
(AWG 18) power cable
(12 inch) max. 10 m max. 2.5 m
(32 feet) (98 inch)
A B
0.75 mm Philips LED
2
(AWG 18) power cable
(12 inch) max. 10 m max. 2.5 m
(32 feet) (98 inch)
(AWG 18) or thicker cable uptil a
2
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
InteGrade LED fixture
The 20 W and 80 W driver
should be built-in.
Tcase max. 80 °C / 176 °F