Philips DayLight 8 Manual De Instrucciones página 4

led_daylight_8_install_us_final_xp7.qxd:Layout 1
4
How to install Philips LED DayLight 8 on your car
How to install the LED modules using clip-on brackets
2
1
Insert LED
DayLight 8 module into
the bracket only after
it is mounted on the car!
Useful information for LED DayLight 8 customized installation
Ø M5
Snap out the protective pieces
from the back of the LED
module. You may use the
(ISO261 screw thread) tapped
holes inside the module's body
for any other type of mounting.
1
3
1 Installation on horizontal surface
3 "
6 . 3
Space required for LED
module installation
Make sure you have the above
space available to install each
module.
If necessary, cut out to
exact size (see above).
21/03/11 13:11 Page 3
2
4 1
2
3
2 Installation on vertical surface
Depending on your car model,
4 "
0 . 7
the customized installation may
be performed:
- with or without using the
clip-on brackets
- with or without cutting out
the surface.
EN
3