Working Safety - Sinmag Europe SM100C Manual De Instrucciones

5. OPERATION STEPS
A.
Put the mixing materials into the bowl together with the agitator.
Then fix the bowl into the bowl bracket.
SM-100C
B. Fix the agitator onto the mixing head.
C.
Lift the bowl to the topnotch by lift handle/lever.
D.
Place the shifter handle to the required speed, then turn on the machine.
You will have to close the safety grid and lift the bowl before you will be
able to start the machine.
E. Turn off the machine and lower the bowl by lift handle/lever then take off the
agitator when mixing work is finished.
F.
Take out the bowl together with agitator.
Finally take out the mixed materials.

6. WORKING SAFETY

A. Disconnect from the power source when cleaning or servicing this machine.
B.
Never attempt to clean this machine while it is in motion, serious injury
could result.
C.
Never place your hand or any kitchen utensil in the bowl whilst the mixer is
in operation.
D. Never operate this machine with safety covers removed or with safety swit-
ches inoperative.
E.
Many mixer operations should be started at the low speed then advanced to
a higher speed as the mixing progresses.
SM-200C
SM-200
SINMAG EUROPE BVBA
SM-500C
ENG
5