Lenze E94AYCPM Instrucciones Para El Montaje página 45

Example: setting the station address 23
DIP switch
Switch state
Value
Station address
)
Note!
Switch off the voltage supply of the communication module and then on
again in order to activate changed settings.
EMF2133IB compatibility mode
Establishing the software compatibility to the EMF2133IB communication module is
required for systems which communicate via an EMF2133IB communication module.
DIP switch 2133 serves to establish the software compatibility.
Switch
2133
)
Note!
The PROFIdrive and DRIVECOM profiles are not supported. Only the
ƒ
DRIVECOM parameter channel and the Lenze device control in the
"EMF2133IB" compatibility mode can be used.
Switch off the voltage supply of the communication module and then on
ƒ
again in order to activate changed settings.
,
EMF2133IB communication manual
Here you'll find some detailed information on the EMF2133IB communication
module.
EDK94AYCPM DE/EN/FR/ES/IT 6.1
64 32
OFF OFF
0 0
= sum of all values = 16 + 4 + 2 + 1 = 23
Switch state
ON
OFF
l
Commissioning
Possible settings via DIP switch
16 8
ON OFF ON
16 0
Function
Establishing EMF2133IB compatibility
No EMF2133IB compatibility
4 2 1
ON ON
4 2 1
7
45