shada 2400340-1 Manual De Operación / Instalación Y Especificaciones página 5

Daylight sensor fuction (img.03)
EN EN
Settings on this demonstration:
DE
Hold-time: 30min,
Daylight sensor turn on threshhold: 50lux
Stand-by Dim: 10%
NL
Stand-by period: +
Daylight sensor turn off threshhold: 300lux
FR
(when the Daylight sensor is activated,
the stand-by time is always + )
ES
1
21:00
The light switches on at
100% when there is
movement detected.
1 3
night time cycle
100% on when
motion is
detected, and dims to
10% during absence.
ammed settings (modes 1 through 4) Pre-programmed settings (modes 1 through 4)
control has 4 pre-programmed settings available which can be sent directly to the sensor. see The remote control has 4 pre-programmed settings available which can be sent directly to the sensor. see
the default settings. Img.05 with the default settings.
1 of the 4 mode buttons, you activate the corresponding mode with programmed settings. These By pressing 1 of the 4 mode buttons, you activate the corresponding mode with programmed settings. These
then be sent directly to the sensor(s) with the settings can then be sent directly to the sensor(s) with the
ettings can be changed as desired by following step 2/3 of " Change sensor settings ". After that, The saved settings can be changed as desired by following step 2/3 of " Change sensor settings ". After that,
gs are stored under the relevant mode button. these settings are stored under the relevant mode button.
ETTINGS (img.05) MODE SETTINGS (img.05)
MODE APPLICATION BRIGHTNESS
MODE1 INDOOR 100%
MODE2 INDOOR 100%
MODE3 INDOOR 100%
MODE4 OUTDOOR 100%
2
21:10
when motion is no
longer detected, the
light dims to the set
stand-by level after the
set hold-time expires
4
08:10
When the natural light
level exceeds the set
lux-value, the light will
turn off (wether motion
is detected or not)
MODE SENSITIVITY BRIGHTNESS
MODE1 75% 100%
MODE2 75% 100%
MODE3 75% 100%
MODE4 75% 100%
3
21:40
The light remains on at
the set dim-level during
the night.
5
17:40
The light automatically
turns on at 10% when
natural light is insuff-
cient (wether motion is
detected or not)
button. button.
HOLD TIME SENSITIVITY STAND-BY TIME HOLD TIME
5min 75% 30min 5min
1min 75% 1min
min
5min 75% 30min 5min
1min 75% 1min
min
Daylight sensor fuction (img.04)
POWER ON
OFF
CHECK
DIM
MOTION
100% ON
STAND-BY DIM STAND-BY TIME DAYLIGHT SENSOR STAND-BY DIM
30% 30min 30%
30% 30%
min
30% 30min 30%
30LUX
(30LUX
30% 30%
min
/300LUX)
EVERY 30min
NO MOTION
HOLD-TIME ENDS
DAYLIGHT SENSOR
30LUX
(30LUX
/300LUX)