Ducasa TBP DRY Serie Manual De Instalación Y Funcionamiento página 29

Notes:
3. In case of power failure, the unit keep in memory only the parameters,
temperature and operating mode. When power is restored, the clock should be
adjusted again to operate the program modes properly.
4. After you finish program mode setting, it will be saved but will not
automatically start working at program mode. You need to press OK-boost to
choose program mode to make the heater work at this mode.
9. Window detection mode
Press to enter setting menu interface and choose window detector function
M
pressing -. Press
+ /
choose "ON" or "OFF". If "ON" is selected, the window detection function is activated and
icon will show on the screen. When temperature decrease detected, the appliance will
automatically enter anti-freeze mode with
appliance will go back to previous mode with
the window detection function.
Remarks: the window detector function is not available under anti-freeze mode and boost
mode.
10. Keyboard lock setting
Press to enter setting menu interface, and + / - to choose keyboard lock icon
M
OK-boost to activate the keyboard lock function
button to enter window detector function. Then press
OK-boost
icon flashing. If temperature rises up, the
icon on. You can choose "OFF" to inactivate
and go back to working interface.
by
-. to
+ /
, press
29