Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
Oscillo-Saw ECO II
6 Cleaning and maintenance
!
Danger of injury through unintentional
activation. Pull out the plug before any
cleaning or main-tenance work.
The following measures should be performed once a week
or more often if the saw is used frequently:
Clean the cooling slots (see fig. 5) to ensure sufficient ventilation for cooling the motor. Clean the
motor compartment from the outside with a jet of dry compressed air.
Wipe disinfection is suitable for motor housing, cable, power plug and all accessories, such as saw
blades and an open-end wrench. For this purpose, we recommend products with a pH-value within 9-10,
e.g. MediClean forte from Dr. Weigert.
It is important to ensure that the device is disconnected from the power supply and the disinfecting liquid
does not enter the interior of the motor.
7 Accessories
HB 8899-03
Transportation case with insert
HB 8889-02
Retrofit kit
HB 8889-02V
Retrofit kit
HB 8878-01
Patent Screw
HB 8877
Special grease, 8 g tube
Round saw blade TITANIUM, 50 mm
HB 8895-03
Round saw blade, TITANIUM, 65 mm
HB 8896-03
Round saw blade "non-stick", 50 mm
HB 8895-04
Round saw blade, "non-stick", 65 mm
HB 8896-04
Round saw blade, 44 mm, for plaster
HB 8897-01
Round saw blade, 44 mm, x-bite
HB 8897-02
Round saw blade, 50 mm, for plaster
HB 8895-01
Round saw blade, 50 mm, x-bite
HB 8895-02
Round saw blade, 65 mm, for plaster
HB 8896-01
Round saw blade, 65 mm, x-bite
HB 8896-02
Round saw blade, 80 mm, for plaster
HB 8898-01
Round saw blade, 80 mm, x-bite
HB 8898-02
Deep saw blade, 70 mm, for plaster
HB 8893-01
Deep saw blade, 70 mm, x-bite
HB 8893-02
Segmental saw blade, 65 mm, for plaster
HB 8892-01
Segmental saw blade, 65 mm, x-bite
HB 8892-02
Waisted saw blade, 65 mm, for plaster
HB 8890-01
Waisted saw blade, 65 mm, x-bite
HB 8890-02
(vacuum cleaner, hose, suction unit, tool), 220-240V, 50/60Hz
(vacuum cleaner, hose, suction unit, tool), 100-120V, 50/60Hz
EN
Fig. 5
19
Publicidad
Capítulos
Tabla de contenido
