Specifications; Unpacking - john deer ET-3409-J Manual De Instrucciones

SPECIFICATIONS:

TABLE SAW ET-3409-J:
Motor
Power Source
Voltage (Volts)
Full-load Current (Amp)
Applicable saw blade
No load speed
Max. sawing dimensions:
Bevel:
Net Weight
Cord

UNPACKING:

The parts illustrated in Fig. 3 described are packaged together with the tool. When unpacking, carefully
confirm that all parts are accounted for.
1. Miter Gauge (1 piece)
2. Saw Blade Guard and Spreader Assembly (1 piece)
3. Elbow (1 piece)
4. Rip Fence (1 piece)
5. Hex. Wrench (1 piece)
6. Wrench (1 piece)
7. Handle Bar (1 piece)
8. Grip (1 piece)
Table Saw Operator's Manual
Functional Description
Series Commutator Motor
Single-Phase AC 60Hz
115
15
Outside Dia. 10" (255 mm)
Hole Dia. 5/8" (15.9 mm)
5000 RPM
90° Max. Height 3"
45° Max. Height 2-1/2"
64 lbs (29 kg)
3 Conductor type cable 6.6 ft (2 m)
Fig. 3
9. 6 x 90 mm Bolt (1 piece)
10. 6 x 110 mm Bolt (1 piece)
11. 6 mm Spring Washer (2 pieces)
12. 6 mm Flat Washer (2 pieces)
13. 8 x 20 mm Bolt w/ Washers (4 pieces)
14. Set Plate (4 pieces)
15. Cusion (1 piece)
11