Maintenance & Care - Bissell SUPREME SWEEP TURBO 4105 Manual De Instrucciones

Maintenance & Care
Emptying dirt cup
1. Make sure that the sweeper is in the
"OFF" position.
2. With the sweeper facing toward you, lift
the dirt cup out.
3. Carry the dirt cup to a waste container
and empty.
4. Replace the dirt cup by gently pressing it
into the foot of the sweeper. Make sure that
it fits securely.
5. Clean exterior surfaces with a soft cloth
dampened with water only. Do not use a strong
detergent or other cleaner – this may damage
the finish. Always unplug the sweeper from the
electrical outlet before cleaning the surface.
Battery removal and disposal
NOTE: It is required that the battery be
removed from the sweeper before it is
disposed of.
1. Important: Unplug charger.
2. Remove handle and dirt cup.
3. Remove (10) Phillips head screws on
the bottom cover as shown in picture.
4. Separate top and bottom cover.
5. Remove wire connectors from the
battery pack.
6. Keep battery pack together – DO NOT
separate individual batteries. For specific
disposal instructions, please contact your local
authorities for requirements and regulations on
safe disposal or recycling facilities in your area.
7. Discard remainder of product.
www.BISSELL.com
6 6
WARNING
To reduce the risk of electric shock, turn power switch off
and disconnect polarized plug from electrical outlet before
performing maintenance or troubleshooting checks.
2.
3.
10 Screws
WARNING
This product contains a nickel-cadmium (Ni-Cd)
rechargeable battery pack. According to Federal and
State regulations, removal and proper disposal of
Ni-Cd batteries is required.