VONROC S3_AG501DC Traducción Del Manual Original página 11

Model No
Battery Type
Voltage
Capacity
Recommended charger
Weight
Model No
Charger input
Charger output
Charging time 2Ah battery
Charging time 4Ah battery
Recommended batteries
Weight
Wear hearing protection.
Only use the following batteries of the VONROC
VPOWER 20V battery platform. Using any other bat-
teries could cause serious injury or damage the tool.
CD801AA 20V, 2Ah Lithium-Ion
CD803AA 20V, 4Ah Lithium-Ion
The following charger of the can be used to charge
these batteries.
CD802AA Quick charger
The batteries of the VONROC VPOWER 20V battery
platform are interchangeable with all the VONROC
VPOWER 20V battery platform tools.
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
• Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
• The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
WWW.VONROC.COM
DESCRIPTION
CD803AA
The numbers in the text refer to the diagrams on
Lithium-Ion
pages 2 - 5.
20V
1. Spindle lock button
2. Release lever for protection guard
4.0 Ah
3. Protection guard
CD802AA
4. Machine
0.65 kg
5. On / off switch
6. Side handle connection point
7. Spindle
CD802AA
8. Side handle
220-240V,50Hz 0.4A
9. Mounting flange
21V 2.5A
10. Wheel disc (not included)
11. Clamping nut
60 minutes
12. Spanner
120 minutes
13. Battery
CD801AA, CD803AA
14. Battery unlock button
15. Battery LED indicators button
0.36 kg
16. Battery LED indicators
17. Charger
18. Charger LED indicators
3. ASSEMBLY
Inserting the battery into the machine (Fig. C­1)
1. Insert the battery (13) into the base of the
2. Push the battery further forward until it clicks
Removing the battery from the machine (Fig. C­1)
1. Push the battery unlock button (14)
2. Pull the battery out of the machine like shown
Checking the battery charging status (Fig. C­2)
• To check the battery charge status, push the
• The battery has 3 lights indicating the charge
• When the lights are not burning it means the bat-
Before any work on the power tool, remove
the battery.
The battery must be charged before first use.
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
machine as shown in Fig. C-1.
into place.
in Fig. C-1.
button (15) on battery shortly.
level, the more lights that burn, the more charge
the battery has left.
tery is empty and must be charged immediately.
EN
11