Thrustmaster T510 Manual De Instrucciones página 3

DESCRIPTION OF DECODER COMPONENTS
1. Analog/Optical input. Enables connection of
an analog or digital audio source.
2. Dolby Pro Logic II decoder mode LED, Left
channel LED in Dolby Headphone mode.
3. Dolby Headphone decoder mode LED,
Center channel LED in Dolby Headphone
mode.
4. Dolby Digital decoder mode LED, Right
channel LED in Dolby Headphone mode.
5. Digital signal input LED, Surround Left
channel LED in Dolby Headphone mode.
6. Stereo headphone mode LED.
7. Analog signal input LED, Surround Right
Channel LED in Dolby Headphone mode.
8. Headphone volume control. Move the switch
up or down to adjust output volume.
9. Battery charger adapter connector. Enables
connection of the battery charger adapter
provided.
10. MUTE mode button. Press this button to
mute the headphone sound; the Dolby
Headphone LED will flash while the decoder
is in mute mode.
11. OUTPUT mode selection button. Press this
button to switch between the Dolby
Headphone and Stereo headphone modes.
12. TEST button. Performs a Dolby Headphone
mode functional test by successfully
activating the Left, Center, Right, Surround
Right and Surround Left channels (displayed
clockwise on the decoder front panel).
13. Power OFF/ON switch.
14. Charge status LED. This LED lights up when
the decoder is connected to the supplied
battery charger adapter.
15. Dual headphone connector. Connect one or
two headphone set(s) to this connector.
3/6