Getting Started; Battery Charging - auna PRO DisGo Box 100 Manual De Instrucciones

EN

GETTING STARTED

Battery charging

This device is equipped with a with a rechargeable battery. The batty will be
charged automatically as soon as the device is connected to power. After
recharging, the device switches to trickle charging. However, do not leave
the device constantly connected to a socket. Turning off the device via
remote control switches it to standby mode, which consumes more power
than switching it completely off at the panel of the appliance.
ATTENTION: Before first use, fully charge the battery for at least 8 hours.
Only after having charged the battery for three times, the battery reaches
its full capacity.
Charge the battery before and after each usage for a lasting battery
performance.
First use / charging the battery
Before your first mobile use (without grid power), charge the battery of the
device fully.
Connect the device to an ordinary wall socket via power adapter. The
charging time is about 5.8 hours. The state of charge is indicated by the LED
on the back. The LED will got out when the batty is fully charged.
21