Incoming Call - Porter Cable PCC771B Manual De Instrucciones

TO PROGRAM THE PRESETS
6 FM and 6 AM radio stations may be independently set. After programming the
buttons, pressing the "1-6" preset toggle button (4) will instantly change the frequency to
the preset station.
To program the channels:
1. Turn power on.
2. Press the mode button (3) until the desired mode is selected (AM or FM).
3. Tune the radio to the desired station (see Tune or Scan Function).
4. Press and hold the set / preset button (5). The "MEM" icon will flash in the LCD display (9).
5. Press the "1-6" preset toggle button (4) to scroll through the 6 presets.
6. Once it displays the desired preset number, press the set / preset button.
7. Repeat steps 3 through 6 to set the other memory buttons.
EQUALIZER BUTTON
To set the bass and treble:
1. Press the equalizer / clock button (6) once. The base equalizer will appear on the LCD
display (9).
2. Press the up and down volume buttons (1) to set the desired bass level.
3. Press the equalizer / clock button a second time to get to the treble equalizer.
4. Press the up and down volume buttons to set the desired treble level.
5. Press the equalizer / clock button a third time to exit.
NOTE: If you do not press a button within 5 seconds, the equalizer programming feature will
automatically return to the previous setting.
USING Bluetooth
1. Turn the radio on.
2. Go to the Bluetooth settings on your Bluetooth enabled device.
3. Find "P3BTR" under devices and select to pair your device. The Bluetooth symbol
will flash on the LCD display (9) while the pairing takes place. Once the pairing is successful
the Bluetooth symbol will remain steady.
4. To listen to your Bluetooth enabled device through the radio, press the Bluetooth button
(7) or press the mode button (3) until "bt" appears on the LCD display (9).
5. Begin playing music on your device.
NOTE: The radio does not have to be in the Bluetooth mode when pairing, only when listening.
®
*The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Porter Cable is under license. Other trademarks and trade names
are those of their respective owners.

INCOMING CALL

If your phone receives a call while it is connected to the radio it will ring through the radio speakers.
Samsung**
When the call is answered, the caller's voice will be heard through the radio. To transfer
the call to your phone, deselect the headset option on your phone. The radio will remain
mute until the call is over.
End the call normally with your cell phone. The radio will resume previous function.
®
**Samsung is a registered trademarks of Samsung Group.
®
iPhone ***
When the call is answered, the call should be taken through your phone. If it is taken
through the radio, transfer the call to your phone. Select "audio source" on your phone,
then select "iPhone." The radio will remain mute until the call is over.
End the call normally with your cell phone. The radio will resume previous function.
IMPORTANT RADIO NOTES
1. Reception will vary depending on location and strength of radio signal.
2. Certain generators may cause background noise.
3. AM reception will most likely be clearer when powered by a battery pack.
®
WIRELESS TECHNOLOGY *
6