Troubleshooting - Porter Cable PCC771B Manual De Instrucciones

Ocultar thumbs Ver también para PCC771B:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

4. To use the auxiliary port (13), plug the output jack from a CD or iPod
into the auxillary port. The sound from the external source plays through the speakers.
®
***iPod
and iPhone
PROBLEM
• Unit will not
power on
• NBC appears on the • Battery is not fully connected. • Push battery fully into battery port
LCD display.
®
• Bluetooth
disconnected.
For assistance with your product, visit our website at www.portercable.com for a list of service
centers, or call the Porter-Cable Customer Care Center at (888) 848-5175.
MAINTENANCE
WARNING: Disconnect the radio from the AC outlet before cleaning. Dirt and grease
may be removed from the exterior of the radio using a cloth. Do not use water or any
cleaning solutions.
WARNING: Never use solvents or other harsh chemicals for cleaning the non-metallic
parts of the radio. These chemicals may weaken the materials used in these parts.
Use a cloth dampened only with water and mild soap. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
CAUTION: NEVER spray or in any other way apply lubricants or cleaning solvents
inside the tool. This can seriously affect the life and performance of the tool.
• Use only mild soap and damp cloth to clean the tool. Never let any liquid get inside the
tool; never immerse any part of the tool into a liquid.
SERVICE NOTES
This product is not user serviceable. There are no user serviceable parts inside the radio.
Servicing at an authorized service center is required to avoid damage to static sensitive
internal components.
®
are registered trademarks of Apple Inc.

TROUBLESHOOTING

POSSIBLE CAUSE
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
• Battery not charged.
• Battery does not have
enough power.
• Battery has been removed.
• Adapter unplugged without
battery in place.
• Power to outlet is off when
using adapter.
• Device roamed out of range.
POSSIBLE SOLUTION
• Plug tool into a working outlet.
• Replace circuit fuse. (If the
product repeatedly causes the
circuit fuse to blow, discontinue
use immediately and have it
serviced at a Porter Cable service
center or authorized servicer.)
• Reset circuit breaker. (If the
product repeatedly causes the
circuit breaker to trip,
discontinue use immediately
and have it serviced at a Porter
Cable service center or
authorized servicer.)
• Have cord or switch replaced
at a Porter Cable Service
Center or Authorized Servicer
• Charge battery
and ensure it is properly connected.
• Charge battery.
• Replace battery.
• Plug adapter into outlet or
properly insert battery.
• Ensure wall outlet is receiving
power or properly insert battery.
• Bring device into range of radio.
• Device may need to be paired to
the radio again. See "Using
Bluetooth
• If two or more devices are paired
to radio, forget the radio in settings
of the other devices.
7
®
***/MP3 player
Wireless Technology"
®

Publicidad

Tabla de contenido
loading

Tabla de contenido