*Do not tighten screws down completely during this portion of assembly.
E
A
C
AA
STEP 4:
Insert two Screws M6x15mm (AA) through one end of Small Arch (E)
and into upper portion of Pole (A). Repeat this step to connect opposite
end of Small Arch (E) to Pole (C). Repeat these steps to assemble Pole
(B) with the second Small Arch (E) and Pole (C). When complete, both
Poles (C) should be diagonal from one another.
8
support@tdcusainc.com
MODEL: 32720 PRODUCT CODE: 43472 05/2018
Assembly Instructions
D
E
D
C
B
AA
(8) Black Zinc Screw
(M6x15 mm)
AFTER SALES SUPPORT
1800 599 8898
USA
*It is advised to use the upper most female-screw inserts on the
Poles (A, B, & C) for Shelves (F) so that they are level. The lower two
inserts will be used later in these instructions for the basket. Do not
tighten screws down completely during this portion of assembly.
AA
(11) Black Zinc Screw
(M6x15 mm)
EE
(8) Knob Screw
STEP 5:
Insert two Screws M6x15mm (AA) through Shelf Brace (O) and into
the bottom side of Shelf (F) at one end; see Fig. 1. Repeat this step to
connect a second Shelf Brace (O) to opposite end of Shelf (F). Follow
these steps to assemble the second Shelf (F) with the two remaining
Shelf Braces (O).
STEP 6:
Insert three Screws M6x15mm (AA) through Utensil Rack (P) and into
the bottom of one Shelf (F). See Fig. 2 for the correct orientation for how
this part is to be installed.
STEP 7:
Insert two Knob Screws (EE) through both Shelf Braces (O) on Shelf
(F) with Utensil Rack (P) and into the upper two female-screw inserts
found on all Poles (A & C); see Fig. 3. Repeat this step to connect the
second assembled shelf to Poles (B & C).
AFTER SALES SUPPORT
1800 599 8898
MODEL: 32720 PRODUCT CODE: 43472 05/2018
Fig. 1
O
AA
F
Fig. 3
Fig. 2
P
AA
USA
Assembly Instructions
F
EE
9
support@tdcusainc.com