Gardenline 32720 Manual Del Usuario página 6

*Do not tighten screws down completely during this portion of assembly.
Fig. 1
L
G
M
FF
(6) M6 Nut
CC
(6) M6x28mm Screw
STEP 8:
Insert the longer ribs of the four Canopy Two-Tier Ribs (G) into the longer
ends of the Main Canopy Connector (M) until they are locked in place. Insert
the short ribs of the four Canopy Two Tier Ribs (G) into the Top Canopy
Connector (L) until they are locked in place. Insert the two Canopy Ribs
(H) into the shorter ends of the Main Canopy Connector (M) until they are
locked in place. See Fig. 1 for an illustration of how these parts connect.
STEP 9:
Place assembled ribs with connectors over the height of assembled frame.
Place ends of Canopy Two Tier Ribs (G) in between Rib Braces (N) at the top
of each Pole (A, B, & C). Place ends of Canopy Ribs (H) between Rib Braces
(N) found at the center of both Long Arches (D). Insert six Screws M6x28mm
(CC) through all Rib Braces (N) and through both rib types; see Fig. 2. Use
M6 Nut (FF) with M6x28mm (CC) to hold parts together. You will be advised
when to tighten these screws in a later step.
10
support@tdcusainc.com
MODEL: 32720 PRODUCT CODE: 43472 05/2018
Assembly Instructions
G
G
H
FF
Fig. 2
CC
AFTER SALES SUPPORT
USA
*Do not tighten screws down completely during this portion of assembly.
Step 10
Step 11
DD
STEP 10:
Insert three Screws M6x18 (DD) through Basket Panel (I) and into
female-screw inserts found on the side of Basket Shelf (J). Repeat this
step to assemble the second Basket Panel (I) to Basket Shelf (J).
STEP 11:
Place Basket Ends (K) in between Basket Panels (I) on both ends of
Basket Shelf (J). See Fig. 1 for the correct orientation of this part. Insert
three Screws M6x16 (DD) through Basket Panels (I) and into Basket
Ends (K) on either side of both ends to complete the basket.
*Complete assembly by securely tightening all screws left loose
through the entire construction process.
AFTER SALES SUPPORT
1800 599 8898 1800 599 8898
MODEL: 32720 PRODUCT CODE: 43472 05/2018
I
J
K
Fig. 1
USA
Assembly Instructions
I
DD
K
I
DD
(12) M6x18mm Screw
11
support@tdcusainc.com