Hardware Installation - D-Link DCS-6112 Guia De Instalacion

Mounting to a Ceiling or a Wall
1.Locate an area on the ceiling or wall which is capable of supporting the weight of the
camera.
2.Attach the alignment sticker to the ceiling or wall.
3.Drill two pilot holes where the holes of the alignment sticker are located.
4.Insert the supplied plastic anchors into the drilled holes, and align the holes at the
base of the camera with the plastic anchors.
5.The camera can be mounted with the cable routed through the ceiling, wall or from the
side.
6.Insert the provided screws through the holes. Use a screwdriver to tighten and secure.
D-Link DCS-6112/DCS-6113 Quick Install Guide
DCS-6112_6113_A1_QIG_v1.00(EU).indd 5

3. Hardware Installation

5
2011/7/5 上午 09:52:36