Memory Dialing; Amplifier; Amplify Button; Ringer Volume - Walker Ameriphone P-300 Manual De Instrucciones

Operating your P-300
C. Memory Dialing
Pick up the handset and simply
press the photo directory button to
dial the phone number programmed.
ff
Bank
Figure 8
D. Amplifier
The amplifier increases the
incoming voice from 0 to 20+
decibels (dB). The graduated scale
indicates the loudness of the volume
setting. The amplifier is turned on
by pressing the AMPLIFY button as
described in the next section.
Figure 9
E. Amplify Button
Press the AMPLIFY button to turn the
amplifier on. When AMPLIFY is
on, it returns to your previous
amplification setting and a red light
will illuminate in the ring flasher
area. When you hang up the
handset, it automatically turns off
the amplifier.
Figure 10
F. Ringer Volume
You may adjust the ringer volume
of your PHOTO PHONE to suit your
needs. When set on high, the
ringer produces a tone that reaches
approximately 75 decibels.
DIAL RINGER
P T Off Lo Hi
E
N
G
L
I
S
H
11