Tpentha Gb2 En Gr Rev.0118 - golmar PENTHA GB2 Guía Rápida De Inicio

PENTHA G 2 B MONITOR
( )
*
Description of the monitor when receiving a call and during communication.
Call/communication time elapsed.
Door panel that made the call.
Communication enabled.
Door 1 enabled.
Door
00:30 PL -1 Record
1 2
( )
*
Answering a call from the door panel.
When a call is received, the monitor(s) will play a melody and show the door panel image on the
master monitor without alerting the visitor. The monitor automatically takes a photo or records a
video (MicroSD card required for video). To answer a call, press option
screen or the logo on the front of any slave monitor in the apartment (unless the 'display
image in call' function is activated on the slave monitor, in which case, option
If the monitor is a PENTHA GB2/H with icon
25 cm away from the monitor to ensure maximum audio quality during communication with the door
panel.
Communication will last for 90 seconds or until option
2
1
To open door 1 or 2, press option /
one press will enable the lock release for 5 seconds.
00:30 PL -1
To open door 1, press the door release option on screen during the communication or call
1
processes: one press will activate the lock release for 5 seconds.
To open door 2, press the door release option on screen during the communication or call
2
processes: one press will activate the lock release for 5 seconds.
( )
For more information, see the "TPENTHA GB2 user manual (code 50121913)"
*
https://doc.golmar.es/search/manual/50121913
2 enabled.
Photo or video capture enabled
(MicroSD card required for video recording).
Screen settings, monitor volume, activating
the light, CCTV camera picture selection
(DQ-CAM-GB2 module required).
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release 1.
Enable lock release 2.
Start communication.
End call/communication.
on the master monitor
must be pressed).
on the front, make sure that the hearing aid is 15 and
on the screen is pressed.
on screen during the communication or call processes:
Screen settings, monitor volume, activating
the light, CCTV camera picture selection
(DQ-CAM-GB2 module required).
Take photo or record video manually.
Video recording (MicroSD card required).
Enable lock release 1.
Enable lock release 2.
Start communication.
End call/communication.
4
PENTHA
Golmar se reserva el derecho a cualquier modificación sin previo aviso.
Golmar se réserve le droit de toute modification sans préavis .
Golmar reserves the right to make any modifications without prior notice.
Web code 50121
golmar@golmar.es
G 2 B M ONITOR
Camera Messages Media Call Log
14:14
Door
Mon .
05 / 06 / 2017
Intercom Divert Light Call
to Phone Options
QUICK GUIDE

TPENTHA GB2 EN GR REV.0118

913
www.golmar.es
Sistemas de comunicación S.A.