The pulse output can be configured through the following parameters :
►
Output deactivation
Disable the pulse output.
►
time Zone
The "Time Zone" is a time offset that can be added or subtracted from the time
received through the NTP protocol (which is UTC time) to generate local time. For
example in France, local time is GMT + 1:00.
►
Day Saving time
In addition to the Time Zone, many countries apply a Day Saving Time correction.
The year is made of two areas: in summer time, 1 hour more is added to the time
(after Time Zone correction), in winter time only the Time zone correction is applied.
Don't forget to select the appropriate country in the WEB interface.
Here are the different DST policies :
European Union
USa / Canada / Mexico /
St. Johns / Bahamas /
turks / Caicos
australia – Standard
Russia
Fine pulse output configuration
►
You can configure here the period and the width of the TOP. If you choose "DCF" as
width parameter, the generated pulse will be DFC type with the local time you have
configured in previous fields.
►
Click on the Set Up! button to save parameters.
MDE-LEDInetworkTOP-4092-V1.1
Start: Last Sunday in March at 1 am UTC
End: Last Sunday in October at 1 am UTC
Start: First Sunday in April
End: Last Sunday in October
Start: Last Sunday in October
End: Last Sunday in March
Start: Last Sunday in March at 2 am local time
End: Last Sunday in October at 2 am local time
65