Axis 5500 Guía De Usuario página 23

AXIS 5500/AXIS 5550 User's Guide
Solaris 9
The printing tool is called Printer Administrator. This operating environment has an integrated
printer driver list, but does not have printer detection functionality.
Instructions:
Type the command /usr/sadm/admin/bin/printmgr in a Terminal window.
SuSE
YaST2 is the recommended printing tool. It contains a printer driver list as well as printer
detection capability.
Instructions:
To start the Printer Configuration tool, select this from the Desktop:
YaST2 menu button (on the panel) | In Yast Control Center | Hardware | Edit Printers
axinstall script
The Axis Communications' axinstall script supports lpd, ftp, PROS A and PROS B print methods. For
more advanced printing functionality, use the PROS filter or named pipe methods.
The axinstall script is an installation and management utility for Axis print servers. With this
installation script, the printer connected to the print server will appear as though it is directly
connected to the host print spooler. If you want to integrate your AXIS 5500/AXIS 5550 into your
host spooler, you can use the Axis installation script axinstall, or perform a manual integration.
Follow these instructions to download axinstall to your host:
1. Open a Terminal window and log in to the AXIS 5500/AXIS 5550 by typing:
ftp <IP address> or ftp <host name>
2. Enter root as the default user id and pass as the default Administrator password.
3. Enter the following command to download the
transfer mode):
get axinstall
4. Exit from the ftp program and enter the following command to install the AXIS 5500/AXIS 5550
axinstall
using the
sh axinstall (or sh ./axinstall depending on your system)
script. Follow the instructions that appear when the script has started.
axinstall
script (make sure you use the ASCII
23