Technical Support - Apricorn Aegis Fortress Guía De Referencia Rápida

Ocultar thumbs

página de 10

/ 10
Contenido
Tabla de contenido
Marcadores

Tabla de contenido

Idiomas disponibles

Locking the Drive

To lock the drive, press the

If data is still being written to the drive, the Fortress will wait until all data has been written to

the drive and then it will lock automatically.

Note: The Aegis Fortress will not be recognized by the operating system in its standby state.

Unlocking the Drive

To unlock the drive, enter either a User PIN or Admin PIN and press the

Adding a new User PIN

Enter the Admin Mode (

Press and hold

Enter a User PIN and press

GREEN

LED flashes

Re-enter the new User PIN and press . If the LED stays solid

and then solid BLUE, the User PIN was successfully added.

Formatting For Mac OS

The Aegis Fortress comes preformatted in NTFS for Windows

For the Mac OS, you must first reformat the drive to a Mac compatible file system.

Once drive is unlocked and inserted into a USB port, open the

Mac Disk Utility from Applications/Utilities/Disk Utilities and perform the following:

1. Select the Aegis Fortress from the list of drives and volumes.

2. Click the 'Erase' tab.

3. Enter a name for the drive. The default name is Untitled. The drive's name will eventually

appear on the desktop.

4. Select a volume format to use. The Volume Format dropdown menu lists the available

drive formats that the Mac supports. The recommended format type is 'Mac OS Extended

(Journaled).'

5. Click the 'Erase' button. Disk Utility will unmount the volume from the desktop, erase it, and

then remount it on the desktop.

For the complete Aegis Fortress manual including detailed formatting instructions,

https://www.apricorn.com/support

12191 Kirkham Road

Poway, CA, U.S.A. 92064

button.

+ 0 for five seconds, then enter Admin PIN and press

+ 1 until the LED turns to Solid

(a minimum of 7 digits and a maximum of 16 digits). The

three times, then returns to Solid