Olimpia splendid AURA DI Instrucciones Para El Uso Y El Mantenimiento página 24

ACTIVE CHARCOALS FILTER
a. The filter "3" must be cleaned or replaced when the "FILTER RESET"
button led (5c) turns on.
b. Clean the filter using a vacuum cleaner.
- - - - - - - - - - - - - - - - - - - - - - - - -
Reposition the filters in the appliance as shown in
figure "A".
8 - STORAGE
a. If there's no intention to use the appliance for a long period of time, clean it as indicated in
the previous paragraph.
b. Store the appliance in the original packaging if possible.
Do not store the appliance in moist or particularly
dirty environments.
9 - TROUBLESHOOTING
a. The appliance doesn't work when pressing the power button.
- The plug is not correctly inserted in the power socket.
- The power socket doesn't work.
b. The appliance is particularly noisy.
- The appliance is not positioned correctly on the supporting surface.
- The supporting surface is not stable.
- The front panel (1) is not correctly hooked to the appliance body (6).
c. The outgoing air flow is particularly weak.
- The filters are dirty.
- There's no space on the sides of the appliance (minimum 20 cm).
- The air suction grid (6a) is dirty or partially blocked.
- The air outlet grid (9) is dirty or partially blocked.
d. Even after a certain use of the appliance, air quality doesn't improve.
- The filters are dirty.
e. Functioning time signalling leds are flashing.
- The front panel (1) is not correctly hooked to the appliance body (6).
EN - 11