1.
Press the lighted power switch to the OFF position. The power switch light will go out.
Open the door and remove the overflow tube.
2.
Inspect and clean the overflow tube rubber seal
3.
Remove the sump filter carefully to keep the soil or waste particles from falling into the sump.
4.
Clean the sump filter by rinsing with clean water.
5.
Be sure to back-flush the filter.
Do not strike the filter against solid objects.
6.
Check the sump for foreign material and clean as required.
Replace sump filter and the overflow tube.
7.
8.
Make sure that spray arms turn freely.
Close the door and turn the ON/OFF switch to ON and return to normal operation mode.
9.
After Each Meal Period or every 8 Hours of Operation.
Heating
Element
Cleaning and Maintenance
Overflow
Tube
Overflow
Seal
Sump
Filter
Sump
Cleaning
9