Warning Label - JB Systems Light TWINBEAM COLOR Mk3 Manual De Instrucciones

ENGLISH
3. ON/OFF KEY ACTUATED SWITCH: used to switch the lasers
on/off. Use the keys to make sure only a skilled operator is able
to switch the laser on.
4. INTERLOCK input: used to connect the optional emergency
stop switch (see picture). When you push this switch the laser
beam will disappear immediately.
IMPORTANT! For your own safety we strongly recommend
to connect this optional switch!
5. INTERNAL MICROPHONE: The built-in microphone is used to
synchronize the laser show to the beat of the music.
6. DMX INPUT: 3pin male XLR-connector used to connect universal DMX-cables. This input receives
instructions from a DMX-controller.
7. DMX OUTPUT: 3pin female XLR-connector used to connect the Twinbeam laser with the next unit in the
DMX chain.
8. DISPLAY: shows the selected DMX address when the unit is in DMX-mode. Shows 3 horizontal lines
when the unit is in stand-alone mode.
9. CONTROL PANEL: Used to select the different functions of the laser, see further to learn how to
operate the unit.
10. SAFETY EYE: used to attach a safety cable when the unit is rigged, see paragraph "overhead rigging"
11. COOLING FAN: used to cool the components inside the enclosure. Make sure to never cover this fan
outlet!
12. POWER LED: indicates that the unit is switched on.
13. SOUND LED: flashes to the sound of the music detected by the internal microphone.
14. HANGING BRACKET: with 2 knobs on both sides to fasten the unit and a mounting hole to fix a
mounting hook.
15. LASER OUTPUT: Here the laser beam leaves the enclosure, make sure to NEVER look inside the unit
through this opening while the laser effect is switched on!
16. WARNING LABEL: "Caution – Class 3B laser. Laser Radiation when open. Avoid exposure to beam."
17. WARNING LABEL: "Laser Aperture"
18. LASER WARNING SIGN: warns against a potentially dangerous laser when not used by skilled
operators.
19. WARNING LABEL: "Laser Radiation. Avoid exposure to beam. Class 3B laser product"
JB SYSTEMS
®
4/57 TWIN BEAM COLOR Mk3 Laser
USER MANUAL