Publicidad
Idiomas disponibles
Idiomas disponibles
Enlaces rápidos
Instruction Manual & Product Warnings
Manuel d'emploi et avertissements sur le produit pour la pièce GEARWRENCH
Manual de instrucciones y advertencias del producto de las piezas GEARWRENCH:
88771 – Wrist Tool Lanyard-2lb (S/M)
88772 - Wrist Tool Lanyard-2lb (L/XL)
GEARWRENCH Wrist Tool Lanyards are only intended for use as part of a tool tethering system and use with tools meeting the
following specifications:
- Total tool weight under 2 lbs. (0.9kg)
- Tool includes a manufactured drilled tether through hole that the corded loop can be cinched to
- If tool does not include a manufactured tether through hole, a closed handled tool (for example found on scissors) that
the corded loop can be cinched to
Installation for closed handled tools
1. Weigh the tool to be used with the Wrist Tool Lanyard. The tool weight must be below the Wrist Tool Lanyard maximum working
load capacity of 2 lbs. (0.9kg)
2. Ensure the cinching of the Wrist Tool Lanyard to the tool will not interfere with the safe working condition of the tool
3. With the corded end of the Wrist Tool Lanyard pass the cord through the handle of the tool
4. Pass the wristband end of the Wrist Tool Lanyard through the loop of the cord
5. To create a secure connection pull tightly to cinch, and the connection point will be created
Installation for tools with existing pre-manufactured tether through holes
1. Weigh the tool to be used with the Wrist Tool Lanyard. The tool weight must be below the Wrist Tool Lanyard maximum working
load capacity of 2 lbs. (0.9kg)
2. Ensure the cinching of the Wrist Tool Lanyard to the tool will not interfere with the safe working condition of the tool
3. With the corded end of the Wrist Tool Lanyard pass the cord through the tether through hole of the tool
4. Pass the wristband end of the Wrist Tool Lanyard through the loop of the cord
5. To create a secure connection pull tightly to cinch, and the connection point will be created
WARNINGS:
- NEVER use GEARWRENCH Wrist Tool Lanyard to connect anything over 2 lbs. (0.9kg)
- GEARWRENCH Wrist Tool Lanyard are Not Personal Protective Equipment
- Always use GEARWRENCH Wrist Tool Lanyard with the recommended length of tethering accessories
- Do not use GEARWRENCH Wrist Tool Lanyard as part of a tethering system around moving or rotating equipment
- GEARWRENCH Wrist Tool Lanyard will not support human weight as part of a tether connection point
- Inspect GEARWRENCH Wrist Tool Lanyard for wear before each use. Do not use if evidence of wear.
MADE IN CHINA - LIMITED 1 YEAR WARRANTY FOR MANUFACTURING DEFECTS EXCLUDING NORMAL WEAR AND TEAR
88771, 88772
Publicidad
Manuales relacionados para Gearwrench 88771
Resumen de contenidos para Gearwrench 88771
- Página 1 88771 – Wrist Tool Lanyard-2lb (S/M) 88772 - Wrist Tool Lanyard-2lb (L/XL) GEARWRENCH Wrist Tool Lanyards are only intended for use as part of a tool tethering system and use with tools meeting the following specifications: - Total tool weight under 2 lbs. (0.9kg)
- Página 2 88771 – Bracelet à longe pour outil – 0.9 kg (2 lb) (P/M) 88772 – Bracelet à longe pour outil – 0.9 kg (2 lb) (G/TG) Les bracelets à longe pour outil GEARWRENCH sont prévus comme élément d’un système de retenue à utiliser avec des outils qui répondent aux caractéristiques suivantes : - Poids total de l’outil de moins de 0.9 kg (2 lb).
- Página 3 - No use GEARWRENCH Muñeca cuerda de amarre para herramientas como parte de un sistema de amarre alrededor de equipos giratorios o en movimiento. - GEARWRENCH Muñeca cuerda de amarre para herramientas no soporta el peso de un ser humano como parte de un punto de conexión de amarre.
- Página 4 GEARWRENCH is a registered trademark of Apex Brands, Inc., a Division of Apex Tool Group, LLC. ® GearWrench est une marque déposée d’Apex Brands, Inc., une division d’Apex Tool Group, LLC. ® GearWrench es una marca registrada de Apex Brands, Inc., una división de Apex Tool Group, LLC.