Set Up Of Control Unit - NSK Ultimate XL Manual De Operación

2. Set up of Control Unit

1. Mounting of Motor
Insert the motor cord plug locator into
Connector aligning it with the groove of the
connector, and tighten the motor cord plug nut
to fix. (Fig. 1)
2. Mounting of Foot Pedal
Insert the Foot Pedal cord plug locator into
14
Foot Pedal Connector aligning it with the
groove of the connector. (Fig. 2)
3. Connecting of Power Cord
Securely insert the plug of
connector at the back of the unit aligning it with
the configuration. (Fig. 3)
5
Motor
16 Power Cord into
6
Fig.1
Fig.2
Fig.3