Optional Blade Usage - RedMax BCZ400SW Manual De Instrucciones

12. Optional blade usage

OPT1
• Remove the guard skirt, in case of
mounting the blade on this product
and use it. (OPT1)
(1) Guard skirt
(1)
WARNING WARNING
• When sharpening, removing, or reattaching the blade, be
sure to wear thick, sturdy gloves and use only proper tools
and equipment to prevent injury.
■ CHOOSE THE BLADE
Choose a suitable recommended cutting attachment according to
the object to be cut. (OPT2)
• When replacing blade always be sure to use products which
have been certified by RedMax.
OPT2 (1)
(A)
(B)
(C)
(D)
(1) 10" : 6298-11313
(2) 10" : 6298-15344
(3) 10" : 6298-14344
(4) Nylon line head
(A) Under growth
(B) Heavy weeds
(C) Light weeds
(D) Grass
■ SET UP THE BLADE
1. Detach the line head assembly. (OPT3)
2. Put on the blade, making the marked
OPT3
(3)
side face the shaft side, put the holder
(1)
and the cover on, and fasten the blade
(2)
with the nut. (OPT3)
(1) Cover: 521 65 59-01 (Option)
(2) Holder (B): 521 65 58-01 (STANDARD)
(3) Nut: 521 80 40-01 (STANDARD)
OPT4
■ BALANCE UNIT
1. Put on strap and attach unit to strap.
2. Slide clamp up or down until unit
balances with head just touching on the
ground. (OPT4)
BCZ400SW
(2) (3) (4)
TIGHTENING TORQUE :
130 – 174 in-lbs
(14.7 – 19.6 N.m.)
U
S
US-17