IDC S1 Modo De Empleo página 35

▷ Start the CAD software.
▷ Create a fictive patient case with indications in the upper and lower jaw (for example, coping in upper
jaw and antagonist in lower jaw).
▷ Select
Artex CR
as the antagonist type.
Fig. 8
▷ Start the scanner.
▷ Using the required spacer plate(s) (0, 1, 2 or 1+2), position the upper jaw within the measuring range
in the scanner (see section 6.2).
▷ Select the number of spacer plates.
I N S T A L L A T I O N
E N
35