Vertex VX-4200 Serie Manual De Operación página 13

nel from the Scanning. When you delete a Group or channel, " - - - - - SCAN Skip
appear on the LCD for one second after pressing the assigned programmable key. To
restore a particular channel to your scanning list, press and hold in the assigned
programmable key again for one second; " - - - - - SCAN Stop
one second after pressing the assigned programmable key.
C S
HANNEL CAN
The Scanning feature is used to monitor multiple channels programmed into the
transceiver. While scanning, the transceiver will check each channel for the pres-
ence of a signal, and will stop on a channel if a signal is present.
To activate scanning:
Press the assigned programmable key to activate scanning on the current group.
The scanner will search the programmed channels, looking for active ones; it
will pause each time it finds a channel on which someone is speaking.
Press the assigned programmable key again to disable scanning. Operation will
revert to the programmed revert channel or activate the Group scanning when
Multi-Group Scanning is enabled.
Note: Your dealer may have programmed your radio to stay on one of the fol-
lowing channels if you press the PTT switch during the scanning pause:
Current channel ("Talk Back")
"Last Busy" channel
"Priority" channel
"Home" channel
"Scan Start" channel
( DW )
D W
UAL ATCH
The Dual Watch feature is similar to the SCAN feature, except that only two chan-
nels are monitored:
The current operating channel; and
The Priority channel.
To activate Dual Watch:
Press the assigned programmable key.
The scanner will search the two channels; it will pause each time it finds a
channel on which someone is speaking.
To stop Dual Watch:
Press the assigned programmable key.
Operation will revert to the "Dual Watch Start" channel.
VX-4200 S
ERIES
A
DVANCED
( SCAN ) C
HANNEL
O M
PERATING
O
PERATION
SCAN Stop - - - - - " will appear on the LCD for
SCAN Stop SCAN Stop SCAN Stop
( SCAN )
S
CAN
ANUAL
SCAN Skip - - - - - " will
SCAN Skip SCAN Skip
SCAN Skip
9