Digital Audio Setup; Dolby Digital Setup - Coby DVD938 Manual De Instrucciones

System Setup

Digital Audio Setup

Digital Output
Set this option to SPDIF/RAW or SPDIF/PCM to activate the coaxial
digital audio output connection.
SPDIF/OFF: There will be no digital audio signal output. (Coaxial

off)
SPDIF/RAW: The digital audio signal output will be in its raw for-

mat. This mode is usually used for DTS & Dolby Digital 5.1 signals.
SPDIF/PCM: The digital audio signal output will be in PCM format.

This mode is usually used for audio CD signals.
LPCM Out
When the DIGITAL OUTPUT option is set to SPDIF/PCM, this item is
available.
Select a sample rating for the analog audio output. There are two op-
tions, 48KHz and 96KHz.
Use the standard 48 KHz option unless your amplifier/receiver
can support a sample rate of 96 KHz over a coaxial digital con-
nection.

Dolby Digital Setup

Dual Mono
STEREO: The player outputs the left-channel audio and right-chan-

nel audio via the FL and FR speaker respectively.
L-MONO: The player outputs the left-channel audio only via both

the FL and FR speaker.
www.cobyusa.com Page 39