Connecting To Flarecon Air 2 Wi-Fi; Connecting To A Dmx Controller; Controlling Dmx Lights With D-Fi Hub - Chauvet DJ FlareCON Air 2 Manual Del Usuario

EN
Finding the Name of FlareCON Air 2 Wi-Fi™
To find the name of the FlareCON Air 2 Wi-Fi
1. Connect FlareCON Air 2 to power.
2. Make sure a channel is selected (see
Signal Input Mode).
3. Press <MENU> to access the main menu.
4. Use <UP> or <DOWN> until Information is selected in the display.
5. Press <ENTER>.
6. Use <UP> or <DOWN> to display the current Wi-Fi
(SSID) from FlareCON Air 2 to select the Wi-Fi
7. Press <MENU> to exit the Information menu function.

Connecting to FlareCON Air 2 Wi-Fi™

To connect a mobile device to the FlareCON Air 2 Wi-Fi
1. Connect FlareCON Air 2 to power.
2. Make sure the input mode is set to WIFI.
3. To connect your mobile device to the FlareCON Air 2 Wi-Fi
™
select the Wi-Fi
4. Open the FlareCON app. The SSID displays in the center of the screen.
Once connected, the name of the FlareCON Air 2 default Wi-Fi
FlareCON User Manual for more information. User Manuals are available at http://www.chauvetdj.com/.

Connecting to a DMX Controller

To configure a system that uses a DMX controller connected to FlareCON Air 2 to control lights (see
Controller via Cable), do the following:
1. Set FlareCON Air 2 for DMX input. See
2. Connect a DMX cable from the DMX Out of the controller to the DMX In adapter of FlareCON Air 2.
3. Configure remaining products. See
For information about operating the DMX controller, see the user Manual for the controller. User Manuals for CHAUVET
controllers are available from the Chauvet website at http://www.chauvetdj.com/.

Controlling DMX Lights with D-Fi Hub

FlareCON Air 2 can wirelessly control DMX lights when it is used with a D-Fi Hub.
To configure a system that uses FlareCON Air 2 and a D-Fi Hub to wirelessly control DMX lights, do the following:
1. Configure products as instructed in
wirelessly receiving products.
2. Connect a DMX cable from the DMX Out of the D-Fi Hub to the DMX In of the DMX product.
Information about using D-Fi Hub can be found in its manual on the Chauvet website at http://www.chauvetdj.com/.
7
QUICK REFERENCE GUIDE
™, do the following:
Selecting A
network named in FlareCON Air 2's Information screen.
Selecting a Signal Input
Setting Up Products with FlareCON Air
Setting Up Products with FlareCON Air 2
Channel) and the input mode is set to WIFI (see
™
name and channel number. Use this default Wi-Fi
™
on your mobile devices.
™
, do the following:
™
, use the Settings function of the mobile device to
™
can be changed in the FlareCON app. See the
Mode.
Selecting a
DMX Signals from a
2.
using a D-Fi Hub as one of the
FlareCON Air 2 QRG Rev. 5
™
name