Care And Maintenance - Steiner RANGER Serie Manual De Usuario

MOUNTING THE RIFLESCOPE
The riflescope is mounted using 30 mm rings. STEINER
recommends the use of high-quality components and the
assignment of a qualified gunsmith to ensure safe mounting,
correct eye relief, the complete field of vision and maximum
accuracy.

CARE AND MAINTENANCE

Your Ranger riflescope is fully water-pressure proof and
fog-proof thanks to its nitrogen filling. In the event that
the lenses are subjected to dust, dirt, or mud, follow the
following steps: Coarse dirt must be removed from the lens
first to avoid damage to the lens coating. Position the rifle-
scope such that particles can fall away from the lens and use
a soft brush to gently whisk away debris/dirt, while blowing
on the lens to dislodge the particles. For heavy dirt, such as
dried mud, you can spray the lens with clean water or lens
cleaning fluid to remove the dirt. Your STEINER riflescope will
provide years of reliable performance given regular cleaning
and care. All moving parts are permanently lubricated. Only
the surface of the riflescope and the exterior lenses require
occasional cleaning. Never disassemble your riflescope.
Disassembly will void the warranty. Protective objective and
ocular covers are included as accessories.
WARRANTY
By purchasing a STEINER riflescope, you are placing your trust
in the precision, ruggedness and quality of our products. In
return, we guarantee our products for a period of 10 years
start starting from the day of purchase. Wear parts, such as
batteries or rubber parts are excluded. Warranty for electronic
parts is limited to 2 years.
Please register your product under www.steiner.de and retain
your proof of purchase at a safe place in the case of a warranty
claim. If you have problems with your riflescope, return it to
your dealer, who will send it to Steiner for repair.
For further information, please visit our website: www.steiner.de.
11