Ec Declaration Of Conformity - Blue Clean ECO 15 Traducción De Las Instrucciones Originales

14
English
10 TROUBLESHOOTING
Problem
The appliance does not switch on
The appliance does not suck in
material, or sucks only weakly
Appliance makes a high-pitched noise
during first few hours of use
Ash leaks from the tank during use of
the appliance
(*) If the motor stops and does not restart during operation, wait 2-3 minutes before repeating the start-up procedure (Overload cutout has been tripped).
If the problem recurs more than once, contact your nearest Authorised Service Centre.
We, Annovi Reverberi S.p.A, of Bomporto (Modena), Italy, declare that the following AR Blue Clean appliance(s):
Designation of appliance: Ash vacuum cleaner
Model No.:
Rated power:
is (are) compliant with the following European directives: 2006/95/EC, 2004/108/EC, 2011/65/EU and 2012/27/EU (Italian Legislative Decree 262/2002).
and was (were) produced in compliance with the following norms or standardised documents:
EN 60335-1; EN 60335-2-2; EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 62233;
Name and address of the person responsible for issuing the technical file: Stefano Reverberi / AR Managing Director
Via ML King, 3 - 41122 Modena, Italy
Date: 14.09.2015
MODENA (I)
Stefano Reverberi
The validity of the warranty is in accordance with the relevant legislation in the country where the product is sold (unless otherwise stated by the producer).
The warranty covers materials, construction and conformity defects during the warranty period, during which time the manufacturer will replace defective parts
and repair the product if not excessively worn, or replace it.
The warranty does not cover components subject to normal wear and tear (valve, piston, water gasket, oil gasket, springs, O-rings, accessories such as the
hose, gun, brushes, wheels, etc.);
The warranty does not cover defects caused by or arising from:
- improper use, misuse, negligence,
- professional use or hire, if the product was sold for domestic use,
- failure to comply with the maintenance instructions provided in this manual,
- repair by unauthorised staff or centres,
- use of non-genuine parts or accessories,
- damage caused by transport, by dirt or foreign bodies, accidents,
- storage or warehousing problems.
Proof of purchase must be submitted to obtain warranty cover.
Per after-sales service, contact the store where the appliance was purchased.
Possible causes
No electrical power
Problems with the electric-electronic circuit
Accessories fouled
Filters fouled or not correctly fitted
Bags full
Tank full
This is not a defect
Tank not properly closed

EC Declaration of conformity

ECO 15
0.8 kW
Managing Director
Check that the plug is firmly in the socket and that the mains
voltage supply is present (*)
Contact the Service Centre
Check and clean the nozzles, extensions or hoses
Clean filters / Fit filters correctly
Empty / change bags
Empty the tank
The noise will disappear by itself after a few hours' use
Fit the cover on the tank correctly and engage the catches
MID 20 TOP 20
0.9 kW 0.9 kW
WARRANTY
Remedy