Brief Description; What's In The Box - SE Electronics X1 A Manual Del Usuario

Thank you
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few minutes
to read the instructions below carefully. We hope you will enjoy working with it as much as we
enjoyed designing and building it for you.
Most Sincerely,
Your sE Team

Brief Description

The X1 A is high quality condenser microphone intended for a wide range of studio applications,
from vocals to drums to acoustic instruments and beyond. Thanks to its custom design and
carefully-selected capsule, it delivers pristine sound quality and an even, well-balanced frequency
response.
The electronics and the switchable attenuation pad ensure a high dynamic range, with high sound
pressure level (SPL) handling capability and extremely low-noise components. The switchable low
cut filter eliminates rumble or footfall noise, and can also compensate for an excess of bass
frequencies caused by the proximity effect. This enables the X1 A to close-mic many instruments
including electric guitar speaker cabinets, brass instruments and drums.
Reliable operation even in demanding on-stage applications in difficult environments is ensured by
the roadworthy all-metal design, robust construction, and high quality manufacturing standards.

What's in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
X1 A microphone

microphone stand clip

thread adapter

Controls
The X1 A features a switch for the attenuation pad and a switch for the low-cut filter.
Attenuation Switch
The Attenuation Switch is located on the front-left side of the
microphone. When switched on, the incoming signal is
reduced by 20 dB for capturing of loud instruments and/or
close-miking without distortion. Using the switch also helps
prevent overloading the input stage of recording interfaces,
mixing desks and microphone preamps.
User Manual - EN
2