Brief Description; What's In The Box - SE Electronics sE2300 Manual De Usario

Thank you
We would like to thank you cordially for choosing this sE microphone! This manual contains some
important instructions for setting up and operating your new equipment. Please take a few
minutes to read the instructions below carefully. We hope you will enjoy working with it as much
as we enjoyed designing and building it for you.
Most Sincerely,
Your sE Team

Brief Description

The sE2300 is the latest multi-pattern version of the fan-favorite 2200 condenser that put sE
Electronics on the map many years ago with its smooth, polished sound for vocals, voiceovers,
and numerous instrumental applications. Like its well-known predecessors, the sE2300 is a high-
quality condenser microphone intended for a wide range of studio applications, from vocals and
spoken word to acoustic instruments to drums and beyond. Thanks to its hand-crafted large-
diaphragm true condenser capsule, shielded custom transformer and class-A circuitry (no ICs
here!) it delivers pristine, flattering sound quality, exceptionally low noise, and an even, well-
balanced frequency response.
The electronics and the switchable attenuation pads ensure a high dynamic range, with high
sound pressure level (SPL) handling capability and extremely low-noise components. The
switchable low-cut filters eliminate rumble or footfall noise, and can also compensate for an
excess of bass frequencies caused by the proximity effect. This enables the sE2300 to close-mic
many instruments including electric guitar speaker cabinets, brass instruments and drums. The
three switchable polar patterns also allow for the tailoring of the balance between direct and
ambient sound, providing many options for various recording techniques.
Reliable operation even in demanding applications in difficult environments is ensured by the
roadworthy all-metal design, robust construction, and high-quality manufacturing standards.

What's in the box

Your packaging should contain the follow items. If anything is missing, please contact your sE
Electronics dealer and let them know.
sE2300 microphone
•
• sE Isolation Pack (shock mount, pop filter)
thread adapter
•
Controls
The sE2300 features a switch for the attenuation pads, a switch for the low-cut filters, and a
switch for the polar pattern selection.
Attenuation Switch
The Attenuation Switch is located on the front-left side of the
microphone. When switched on, the incoming signal is reduced by
either 10 or 20 dB for capturing of loud instruments and/or close-
miking without distortion. Using the switch also helps prevent
2
User Manual - EN