Astro Tool 1756 Manual De Instrucciones

PRODUCT INFORMATION:
• 2 Speed
• Free Speed 2000 rpm
• Adjustable depth stop which allows you to drill out just the
spot weld and not the panel beneath
• Drills out the entire spot weld, eliminating the need for grinding
• Lower speed decreases heat and extends drill bit life
• Kit Includes:
1 - Air Spot Weld Drill with 8mm Drill Bit
1 - 5.5" Deep Clamp
4 - Drill Bits 2pcs. 6.5mm (#1720) and 2pcs. 8mm (#1721)
1 - In Line Oiler (#3000)
1 - 3 Way Swivel (#3SB10)
1 - Plastic Blow Molded Case
SPECIFICATIONS:
Drill Bit Size Chuck Capacity:
Free Speed:
Overall Length:
Net Weight:
Air Inlet Thread NPT:
Air Hose I.D. Size:
Avg. Air Consumption:
Air Pressure:
1756
5/16"
1,600 - 2,000rpm
8-3/4" (222mm)
3lbs. (1.4kg)
1/4"
3/8" (10mm)
4cfm
90-120psi
AIR SPOT DRILL KIT WITH 5.5" DEEP
CLAMP AND 5 DRILL BITS
www.astrotools.com
1 YEAR LIMITED WARRANTY
• Astro Pneumatic Tool Co. warrants our products to the original user against defective
material or workmanship for a period of 1 year (except where noted on our price
schedule) from the date of 1st use. Astro reserves the right to determine whether the
product failed because of defective material, workmanship or other causes and to charge
back for missing parts. Astro Pneumatic Tool Co., at its discretion, will repair products
covered under this warranty free of charge. The distributor should direct the original user
to return the product (with the exceptions listed below) with the distributor's name,
address, adequate proof of date of purchase or a copy of warranty card, and a short note
explaining the problem. Failures caused by accident, alteration, or misuse are not
covered by this warranty.
• If one part of this product fails, please do not return the entire product. Astro will
replace free of charge component parts of this product that fail within 1 year of first
use by the original user. Items included in this category include but are not limited
to kits, hand tool kits and any other product where there are multiple items or
components that make up the unit. Please contact the phone number below in
order to obtain the replacement components covered under warranty.
• Astro Pneumatic Tool Co. or its authorized service representatives must perform all
warranty repairs. Any repair to the product by unauthorized service representatives
voids this warranty. The rights under this warranty are limited to the original user and may
not be transferred to subsequent owners.
• This warranty is in lieu of all other warranties, expressed or implied, including warranties
of merchantability and fitness for a particular purpose. Some states do not allow the
exclusion of limitations of incidental or consequential damages so the
above limitations may not apply to you.
PLEASE DO NOT RETURN ANY PRODUCT WITHOUT CALLING
1-800-221-9705 FOR INSTRUCTIONS
When unpacking, check the parts diagram and part number
listing on page 4 to make sure all parts are included. If any
parts are missing or damaged, please call your distributor.
IMPORTANT
AIR SPOT DRILL KIT WITH 5.5" DEEP CLAMP AND 5 DRILL BITS
Page 1
Unpacking
MADE IN TAIWAN