Other Faults - Fresh Ventilation INTELLIVENT CELSIUS Manual De Instrucciones

The fan runs non-stop
No LEDs on
• Check that the "constant operation" function is not
activated. See page 10.
• Remove the cover and disconnect the power supply to
the fan by moving the safety switch to 0. Then return the
switch to I.
• Perform a factory reset by holding the SPEED minus button
for at least five seconds.
Yellow LED is constantly on
• Remove the cover and disconnect the power supply to
the fan by moving the safety switch to 0. Then return the
switch to I.
• Check calibration and settings for thermostat.
• Then adjust the thermostat's temperature to higher than
that in the room if the stove is not lit.
The recommended starting temperature is at least 25°C
If the fan still runs nonstop, you can return the fan as long as
it is within the warranty period and you have a receipt. See
Guarantee on page 15.

Other faults

The fan does not work as described
• Remove the cover and disconnect the power supply to
the fan by moving the safety switch to 0. Then return the
switch to I on/off.
• Perform a factory reset by holding the SPEED minus button
for at least five seconds.
If the fan still does not work as described in this manual, contact
the retailer or Fresh AB.
EN
19