Installation - Fresh Ventilation INTELLIVENT CELSIUS Manual De Instrucciones

Installation guide
1 Contents
The packaging should contain the following:
EN
• Fan
• 2 adapters, 1 x Ø98 mm and 1 x Ø118 mm
• Manual
• Accessory bag with 4 screws and plugs, a pull cord with
toggle, and insulation for the standard cable type (FK)

2 Installation

The fan can be installed on a wall or on a ceiling. See the
diagram below for installation dimensions. The fan must
not be installed in an environment where the temperature
exceeds 50°C. Attach an appropriate adapter to the fan's
chassis, Ø98 (1) for a Ø100 duct or Ø118 (2) for a Ø125 duct.
The fan can also be installed
1
and used without an adapter,
so that it is mounted com-
pletely on the surface, e.g. in
the case of ducts less than
Ø98.
2
When installing the fan, check
that there is a seal between
the pipe/duct and wall/ceiling
to prevent air from penetrating the wall or ceiling. Use the
accompanying screw and plug, if necessary.
Min 120
45 45
x4
Alt. x4
Ø100 alt. Ø125
5