Charging The Power Bank; Using The Power Bank - Conceptronic CPOWERB1500 Manual De Usuario

4.1

Charging the power bank

You need to charge the power bank before you can use it. You can charge the power
bank through the USB port on your computer, or through a USB power adapter, like
the Conceptronic CUAPTFOLD or CUAPTTRAV.

Pull the USB connector [D] from the bottom of the power bank.

Connect the USB connector to a free USB port on your computer, or to a free
USB port on your USB power adapter.
The charging LED [C] will turn orange, indicating that the power bank is charging.
The capacity LEDs [B] show the capacity of the power bank. When all 3 capacity
LEDs are lit and the charging LED is green, the power bank is fully charged.
Note: A full charge of the power bank can take up to 4 hours.

Disconnect the USB connector from your computer, or from your USB power
adapter.

Put the USB connector back in the storage place on the bottom of the power
bank.
4.2

Using the power bank

When the power bank is charged, you can use it to charge your mobile devices, like
your mobile phone, iPod, PSP , etc. Before you can charge your mobile device, you
need to pick the correct tip which fits your mobile device.

Pick the correct tip from the 7 included tips and connect the tip to the DC-to-
DC power cable.
Note: If the tip you need is not included, but you have a USB charging cable
for your mobile device, you can use this USB charging cable in
combination with the DC-to-USB power cable which is included with
the power bank.

Connect the DC-to-DC power cable or the DC-to-USB power cable to the DC
output [A] of the power bank.

Connect the tip to your mobile device.
4.Using your power bank
ENGLISH
7