To Set the PIN in the Climate Logic Receiver Module:
1.
After setting the PIN in the handheld transmitter (see
above), open the Climate Logic receiver module.
2.
Press the MENU button to get to the Main Menu on
the module's display.
3.
Repeatedly press the UP or DOWN key on the module
to move the cursor to REMOTE.
4.
Press ENTER to get to the Remote PIN screen.
5.
Repeatedly press the UP or DOWN key to set the first
digit on the left.
6.
Press NEXT to move one digit to the right.
7.
Repeat the steps to set all four digits in the PIN.
8.
With the PIN matching the handheld receiver's PIN,
press SAVE.
8